Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change the Engine Oil and Oil Filter of the Mitsubishi Colt 1.1

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Part: Engine oil

Today, see the necessary instructions to carry out the regular maintenance service by replacing the engine oil and oil filter of the Mitsubishi Colt. First, lift the vehicle and unscrew the oil drain bolt using a socket spanner; let the oil drain into a container for about ten minutes. Next, unscrew the oil filter cartridge, which is located next to the sump, screwing it in gently; now unscrew the filler cap and pour in the new engine oil, finally checking the level with the dipstick!

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the oil and filter in the Mitsubishi Colt?
How to change the oil and filter in the Mitsubishi Colt?
Mitsubishi Colt (2004-2012 / MK 1, Z30) The engine oil capacity for the Mitsubishi Colt is 5 litres. This should have a viscosity rating of 5W40. In addition to the engine oil, you also nee…
How to Change Oil on Mitsubishi Colt
How to Change Oil on Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) Change the engine oil on a Mitsubishi Colt? Lift the car on a jack and locate the bolt to remove. Use a socket to unscrew the large securing bolt of …
How to Perform a Service on a Mitsubishi Colt
How to Perform a Service on a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) In this short video tutorial, you will see how to perform a service, which includes changing the engine oil and the corresponding filter on a Mitsubi…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos