Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil and filter in the Mitsubishi Colt?

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Part: Engine oil

The engine oil capacity for the Mitsubishi Colt is 5 litres. This should have a viscosity rating of 5W40. In addition to the engine oil, you also need to obtain the oil filter as both should be replaced together. In the first few minutes of the video, it also shows how to replace the air filter, but this operation is not necessary for the engine oil change. What you need to do is position yourself under the car with a collection container and open the plug of the oil sump to drain the used lubricant. Close the plug and replace the oil filter before moving to the front bonnet to add the new engine oil.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change Oil on Mitsubishi Colt
How to Change Oil on Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) Change the engine oil on a Mitsubishi Colt? Lift the car on a jack and locate the bolt to remove. Use a socket to unscrew the large securing bolt of …
Change the Engine Oil and Oil Filter of the Mitsubishi Colt 1.1
Change the Engine Oil and Oil Filter of the Mitsubishi Colt 1.1
Mitsubishi Colt (2004-2012 / MK 1, Z30) Today, see the necessary instructions to carry out the regular maintenance service by replacing the engine oil and oil filter of the Mitsubishi Colt.…
How to Replace the Air Filter of the Mitsubishi Colt
How to Replace the Air Filter of the Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) In this brief and simple guide, discover the steps to remove and replace the air filter of the Mitsubishi Colt. First, open the bonnet and start by u…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos