Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil on Mitsubishi Colt

Model: Mitsubishi Colt MK 1, Z30 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Engine oil

See other generations:
Video tutorial

Change the engine oil on a Mitsubishi Colt? Lift the car on a jack and locate the bolt to remove. Use a socket to unscrew the large securing bolt of the container cap where the oil filter is located.

Allow the used oil to drain into a container. Unscrew the worn oil filter and fit a new one (use a chain wrench).

Lower the car and remove the jack. Unclip and lift the front bonnet.

Finally, top up with the new oil and close the front bonnet. Test the operation of the car in all its parts.


Updated on 21 March 2026 by ScegliAuto


Related tutorials

Change the Engine Oil and Oil Filter of the Mitsubishi Colt 1.1
Change the Engine Oil and Oil Filter of the Mitsubishi Colt 1.1
Mitsubishi Colt (2004-2012 / MK 1, Z30) Today, see the necessary instructions to carry out the regular maintenance service by replacing the engine oil and oil filter of the Mitsubishi Colt.…
How to change the oil and filter in the Mitsubishi Colt?
How to change the oil and filter in the Mitsubishi Colt?
Mitsubishi Colt (2004-2012 / MK 1, Z30) The engine oil capacity for the Mitsubishi Colt is 5 litres. This should have a viscosity rating of 5W40. In addition to the engine oil, you also nee…
How to Change Engine Oil on a Mitsubishi Colt
How to Change Engine Oil on a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) To change the engine oil on this car model DIY, find the information and instructions in the video and description below. After opening the bonnet an…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos