Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Engine Oil on a Mitsubishi Colt

Model: Mitsubishi Colt MK 1, Z30 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil on this car model DIY, find the information and instructions in the video and description below. After opening the bonnet and unscrewing the oil filler cap, lift the vehicle on a ramp to unscrew the oil drain plug, ensuring you have placed a container on the floor to collect the used oil. Then proceed to unscrew the oil filter and replace it with a new one. Finally, reattach the drain plug, lower the vehicle, and refill the system with new lubricant.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Change the Engine Oil and Oil Filter of the Mitsubishi Colt 1.1
Change the Engine Oil and Oil Filter of the Mitsubishi Colt 1.1
Mitsubishi Colt (2004-2012 / MK 1, Z30) Today, see the necessary instructions to carry out the regular maintenance service by replacing the engine oil and oil filter of the Mitsubishi Colt.…
How to change the oil and filter in the Mitsubishi Colt?
How to change the oil and filter in the Mitsubishi Colt?
Mitsubishi Colt (2004-2012 / MK 1, Z30) The engine oil capacity for the Mitsubishi Colt is 5 litres. This should have a viscosity rating of 5W40. In addition to the engine oil, you also nee…
How to Change Oil on Mitsubishi Colt
How to Change Oil on Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) Change the engine oil on a Mitsubishi Colt? Lift the car on a jack and locate the bolt to remove. Use a socket to unscrew the large securing bolt of …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos