Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the air filter on the Mitsubishi Colt?

Model: Mitsubishi Colt MK 1, Z30 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Air filter

See other generations:
Video tutorial

If you need to replace the air filter on this vehicle, you can find simple instructions below and also refer to the video. First, open the bonnet and locate the box containing the filter next to the battery.

Remove the air intake duct and unclip the steel clips around the box. Then, lift the cover and remove the filter. Take the new filter and place it in the housing.

Refit the cover, reattach the securing clips, and reconnect the air duct.


Updated on 8 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Mitsubishi Colt
How to Replace the Air Filter of the Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) In this brief and simple guide, discover the steps to remove and replace the air filter of the Mitsubishi Colt. First, open the bonnet and start by u…
How to Replace the Air Filter on a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) Replacing the air filter on a Mitsubishi Colt? Let's see how to remove it from inside the engine bay. Open the car door, pull up the engine bay relea…
How to replace the fuel filter on the Mitsubishi Colt
How to replace the fuel filter on the Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) The engine air filter on the Mitsubishi Colt model z30 vehicle is replaced every six months to prevent too much dust from being present. This ensures…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos