Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Engine Oil Light on the Mitsubishi Outlander?

Model: Mitsubishi Outlander MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

Resetting the engine oil change light on the Mitsubishi Outlander can be done independently in under five minutes. Before starting, ensure the car is off, then repeatedly press the "info" button located to the left of the dashboard until you reach the service screen, with the spanner icon displayed at the top. Once here, hold down the "info" button until the spanner icon starts to flash.

At this point, release the button and then press it again briefly without holding it down.


Posted on 28 August 2026 by ScegliAuto


Related tutorials

Mitsubishi Outlander (2021-2026 / MK 4) The oil light illuminates on the instrument panel of a vehicle when it is necessary to check the oil level in the reservoir. If the oil level is not …
Mitsubishi Outlander (2007-2012 / MK 2) If you want to find out how to correctly perform a manual reset of the maintenance light on your 2010 Mitsubishi Outlander, all you have to do is fol…
Mitsubishi Outlander (2013-2021 / MK 3) To reset the Service light on the Mitsubishi Outlander, press the button located to the right of the instrument cluster until the spanner icon appear…

Other guides you may be interested in

How to Replace the Battery in a BMW 2 Series Active Tourer?

To replace the battery in a BMW 2 Series Active Tourer, open the hood to access the components in the engine compartment: in the upper right corner, just below the windshield on the driver's side, you will find a panel to remove. The battery is located under this panel and can be removed by loosening the screws that secure it and disconnecting the power cables; this will allow you to connect and install the new battery to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos