Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the air and cabin filter on a Mitsubishi Space Star

Model: Mitsubishi Space Star - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Air filter

Video tutorial

The video shows the replacement of the cabin filter and engine air filter on a Mitsubishi Space Star. For the cabin filter: open the glove compartment, empty it, and press the two side tabs to detach and lower it. Below is the filter cover: release it, pull out the old filter, and insert the new one, closing the cover until it clicks.

No tools are needed; for the engine air filter: open the bonnet.

Disconnect the hose with a 10 mm spanner and disconnect the mass air flow (MAF) sensor. Unclip the two side clips and remove the cover.

Inside is very dirty. Unscrew the two 10 mm bolts (one at the front, one at the back; a short extension is needed) and remove the entire filter housing.

Clean the inside with pressurised water, including the side resonance chamber. Reattach the bolts, insert the new filter, pressing it firmly into place.

Replace the cover, secure it with the clips, and reconnect the hose. Caution: the hose must be well sealed, as air is measured from that point and must remain sealed until it reaches the cylinders.


Posted on 16 October 2026 by ScegliAuto


Related tutorials

Mitsubishi Space Star (2012-2024 / MK 2) Regularly replacing the air filter that supplies the injection system of the Mitsubishi Space Star helps the engine breathe better and keeps fuel con…
Mitsubishi Space Star (2012-2024 / MK 2) To prevent dust and dirt from entering the ventilation system of the Mitsubishi Space Star, a special filter has been installed that must be changed …
Mitsubishi Space Star (1998-2005 / MK 1) In this tutorial, you will see how to replace the cabin filter in a Mitsubishi Space Star, a very simple and quick operation. First, position yoursel…

Other guides you may be interested in

How to Lower the Rear Seats in the Nissan Qashqai?

In this tutorial, you will see how to lower the rear seats in the Nissan Qashqai, a very simple and quick operation, for example, when you need more space in the boot. First, open both rear doors, then locate the lever on the upper part of the first seatback, pull it upwards, and simultaneously lower the seatback. Move to the opposite side and repeat the procedure. To put everything back together, simply lift the seatbacks and press them firmly to lock them into their respective supports.

Watch the video!


by ScegliAuto

More videos