Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. L 200
    4. : How to replace engine oil on Mitsubishi L 200

Mitsubishi L 200 - Video tutorial

Model: Mitsubishi L 200 MK 2 - Years 2005-2015
Part: Engine oil
Operation: How to replace engine oil on Mitsubishi L 200

We always change the oil and filters at each service, we see the removal of the filter and the oil change. We place the car on a column bridge and lift it to a comfortable height to intervene in the disassembly. To change the engine oil, remove the plastic cover of the engine; unscrew the pin located under the oil sump with a socket wrench. Once the pin is unscrewed, let the liquid flow into a container. Let's get ready to screw the pin back with the key. We remove the oil filter placed under the front right stone guard. We mount the new filter in the dedicated housing, top up the engine with oil.


Posted on 1 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • L 200 2005-2015 - How much engine oil is needed for the Mitsubishi L200? Read Answer
    • L 200 2005-2015 - How many liters of oil are needed for the Mitsubishi L 200? Read Answer
    • L 200 2015-2024 - How many liters of engine oil are needed for the Mitsubishi L200? Read Answer
    • L 200 2005-2015 - How many liters of engine oil do you need for the Mitsubishi L200? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos