Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. L 200
    4. : Replacement oil filter, air filter, fuel filter and Mitsubishi L200 engine oil

Mitsubishi L 200 - Video tutorial

Model: Mitsubishi L 200 MK 1 - Years 1996-2005
Part: Oil filter
Operation: Replacement oil filter, air filter, fuel filter and Mitsubishi L200 engine oil

Today we will see how to carry out the complete service (replacement of the air filter, oil filter, engine oil and fuel filter) of a Mitsubishi L200; mainly we will describe how to replace the engine oil and oil filter. First we lift the car and go to unscrew the oil vent bolt: then let it come out for about ten minutes before putting the bolt back on. At this point we are going to disassemble the oil filter by unscrewing it with the special filter wrench and replace it with the new one, paying attention to the gasket; if interested, follow the rest of the video!


Posted on 28 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • L 200 2015-2024 - Where is the Mitsubishi L 200 oil filter located? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos