Do it yourself
| ||||
|
Mitsubishi L 200 - Video tutorial
Model: Mitsubishi L 200
MK 2
- Years 2005-2015 In this video tutorial we will see how to remove and replace the engine oil and oil filter of a Mitsubishi L200. First we go to lift the car, removing the oil drain plug by unscrewing it with a socket wrench: let the oil drain out for about ten minutes and then close it by screwing the bolt. At this point we access the engine compartment to be able to remove the oil filter: with the special filter wrench we go to unscrew it and replace it with the new one; pay attention to any filter gasket, to be inserted correctly. Finally we pour in the new engine oil.
Posted on 28 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.051
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |