Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. L 200
    4. : How to replace fuel filter on Mitsubishi L200

Mitsubishi L 200 - Video tutorial

Model: Mitsubishi L 200 MK 2 - Years 2005-2015
Part: Diesel filter
Operation: How to replace fuel filter on Mitsubishi L200

Replacing the diesel filter on a Mitsubishi l200, let's see how it is removed from inside the engine compartment. We raise the front engine hood, we locate the diesel filter inside. With a large screwdriver we unscrew the screw that tightens the liquid circulation pipe to the filter (we can also use a socket wrench) placed near the container where the diesel filter is located. We unscrew the screws on the sides of the filter. Once the filter has been removed, remove it from the car (replace it with a new filter). Finally we reassemble the filter to the attached container of the diesel filter (we connect pipes and cables) and tighten the appropriate pins. We turn on the vehicle and check.


Posted on 2 December 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos