Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. L 200
  6. : How to remove the fuel tank on the Mitsubishi L200 MK1

Mitsubishi L 200 - Video tutorial

Model: Mitsubishi L 200 MK 1 - Years 1996-2005
Operation: How to remove the fuel tank on the Mitsubishi L200 MK1

In this video we will see the main steps to disassemble the fuel tank on the Mitsubishi L 200, following the instructions below. First of all we lift the car on the rear side and start by removing the fuel filter; to do this we unscrew the bracket bolts and remove the fuel pipes, as shown in the video. At this point we unscrew all the tank support bolts, using a socket wrench; we disconnect the various pipes and then the fuel pump or the float. We just have to remove the tank from the car!


Posted on 8 March 2024 by ScegliAuto

    Frequently Asked Questions

    • L 200 2015-2024 - How many liters of engine oil do you need in a Mitsubishi L 200? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos