Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. L 200
    4. : How do you replace the engine oil of the Mitsubishi L 200?

Mitsubishi L 200 - Video tutorial

Model: Mitsubishi L 200 MK 3 - Years 2015-2024
Part: Engine oil
Operation: How do you replace the engine oil of the Mitsubishi L 200?

In order to replace the engine oil of the Mitsubishi L 200, it is necessary to lift the car, in order to have access to the components in its lower part: here you will find the oil tank drain plug, which must be unscrewed in order to collect all the used oil inside a container. It will also be possible to unscrew the oil filter located in the same position and replace it with a new one; after the new filter has been inserted, it will be necessary to open the hood and perform the top-up, from inside the appropriate vent located in the engine compartment.


Posted on 28 July 2023 by ScegliAuto

    Frequently Asked Questions

    • L 200 2005-2015 - How much engine oil is needed for the Mitsubishi L200? Read Answer
    • L 200 2005-2015 - How many liters of oil are needed for the Mitsubishi L 200? Read Answer
    • L 200 2015-2024 - How many liters of engine oil are needed for the Mitsubishi L200? Read Answer
    • L 200 2005-2015 - How many liters of engine oil do you need for the Mitsubishi L200? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos