|
Do it yourself
| |||
| ||||
How to Reset the Service Light on a Mitsubishi Outlander
Model: Mitsubishi Outlander
MK 2
- Years 2007-2012
In this tutorial, see how to reset the oil change light on a Mitsubishi Outlander. First, perform maintenance, such as changing the engine oil and filters. After the DIY service, get in the vehicle, engage the handbrake, and turn on the ignition without starting the engine. Ensure all warning lights are illuminated and wait three seconds. Press the "INFO" button located on the left side of the dashboard. Press this button three times to access the service panel; the spanner icon will start flashing on the display. Press the button three more times until the message next to the spanner icon flashes. Press the button until you find the NAS 20 entry and hold it until it stops flashing. Reset complete.
Updated on 22 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Mitsubishi Outlander
(2013-2021 /
MK 3)
The service light on the Mitsubishi Outlander MK3 (produced between 2013 and 2020) can be reset very easily using a single button. Once the ignition …
Mitsubishi Outlander
(2013-2021 /
MK 3)
If you want to correctly complete the manual reset of the service light on your 2017 Mitsubishi Outlander, you must read the following steps and appl…
Mitsubishi Outlander
(2013-2021 /
MK 3)
In order to reset the Service light of the Mitsunishi Outlander, you need to turn on the instrument panel by turning the key inside the ignition swit…
Other guides you may be interested in
|
How to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.165
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
