Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Reverse Switch on the Mitsubishi Pajero 3.5L

Model: Mitsubishi Pajero V20, MK 2 - Years 1991-1999

In this brief and simple guide, you will learn how to remove and replace the reverse switch on the Mitsubishi Pajero with a 3.5-litre engine. First, locate the reverse switch; if possible, raise the vehicle for better access. The switch is located under the vehicle on the driver's side; disconnect the electrical connector and unscrew the switch to remove it, as shown in the video. Now install the new reverse switch, as well as the original one, following the video tutorial to the end for reassembly!

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Reversing Light Bulb on a Mitsubishi Pajero
How to Replace the Reversing Light Bulb on a Mitsubishi Pajero
Mitsubishi Pajero (1991-1999 / V20, MK 2) Before you can begin, open the tailgate of the luggage compartment on your Mitsubishi Pajero. Start by unscrewing and removing the screws that hold t…
Replace the 4x4 Traction Connector on the Mitsubishi Pajero 4
Replace the 4x4 Traction Connector on the Mitsubishi Pajero 4
Mitsubishi Pajero (2006-2021 / MK 4, V80) In this video tutorial, you will learn how to dismantle and replace the connector (the switch) that diverts the 4x4 traction from 4x2 by pressing the…
How to Recline the Rear Seats of the Mitsubishi Pajero
How to Recline the Rear Seats of the Mitsubishi Pajero
Mitsubishi Pajero (2006-2021 / MK 4, V80) This guide briefly explains the main instructions for lowering the rear seats of the Mitsubishi Pajero. First, open the rear doors and start lifting …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos