Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. L 200
  6. : How to reset the service light on a Mitsubishi L200

Mitsubishi L 200 - Video tutorial

Model: Mitsubishi L 200 MK 3 - Years 2015-2024
Part: Instrument cluster
Operation: How to reset the service light on a Mitsubishi L200

To reset the service warning light on the Mitsubishi L200, get into the car, close all the doors, and with the ignition off, scroll the text on the screen by pressing the button on the right - near the speedometer - until the wrench symbol appears . Press and hold this same button until the wrench symbol starts flashing. At this point keep pressing for a few seconds, then press again. The message "clear" will appear. Keep holding again for a few seconds. Now, when you switch on the ignition, you will be able to see that the service warning light will have gone out.


Posted on 5 June 2023 by ScegliAuto

    Frequently Asked Questions

    • L 200 2005-2015 - What are the indicators on the dashboard of the Mitsubishi L200? Read Answer
    • L 200 2005-2015 - How to find the meaning of the warning lights on the dashboard of the Mitsubishi l200? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos