Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Colt
    4. : How to perform a service reset on Mitsubishi Colt.

Mitsubishi Colt - Video tutorial

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Part: -board computer
Operation: How to perform a service reset on Mitsubishi Colt.

The first thing to do to reset the service light on a Mitsubishi Colt is vehicle maintenance such as changing the engine oil and filters. After performing the do-it-yourself service, get into the car, put on the handbrake, insert the key and turn on only the instrument panel without also turning on the ignition; press the button under the speedometer until you find the wrench which indicates service, now press and hold the button under the speedometer until the wrench starts flashing; when it starts flashing, we have to release the button and then keep it pushed again until it is completely reset.


Posted on 6 June 2023 by ScegliAuto

How to reset the error of the VSC warning light and the ABS of the Toyota Rav4

Let's see in this guide how to reset the error of the VSC warning light or the ABS of the Toyota Rav4, analyzing the possible causes. In fact, usually the VSC warning light appears almost always simultaneously with that of the ABS; it indicates a fault in the braking system, in particular in the brake pedal switch located behind the pedal, as shown in the video. Then we get on board the car, on the driver's side, and start by unhooking and removing our switch, disconnecting the electrical connector; then let's reassemble everything, checking that the errors have been cleared from the instrument panel!

Watch the video!


by ScegliAuto

More videos