Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When to Replace the Timing Belt on a Mitsubishi ASX

Model: Mitsubishi Asx MK 1 - Years 2010-2023
Part: Timing belt

The timing belt is a very important component of your engine, as it connects the crankshaft, which is linked to the pistons, with the camshaft that regulates the movement of the valves. These two movements must be perfectly in phase. When this synchronisation is lost, it results in complete misalignment, leading to severe and often irreparable damage. Therefore, maintenance on this component is essential, and it is crucial to always adhere to the replacement schedule set by the manufacturer. For this vehicle model, the replacement is recommended after 75,000 miles.

Updated on 20 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Mitsubishi ASX
How to Reset the Tyre Pressure Warning Light on the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) This guide explains the procedure to reset the tyre pressure warning light on the Mitsubishi ASX. Before performing this operation, ensure that the p…
How do you reset the Service light in the Mitsubishi ASX?
How do you reset the Service light in the Mitsubishi ASX?
Mitsubishi Asx (2023-2026 / MK 2) The Mitsubishi ASX is not different from other modern cars, in fact it also has a reminder about the service deadline, so it will remind us when it i…
How to Open the Bonnet of a Mitsubishi ASX
How to Open the Bonnet of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Before you can begin, open the driver's side front door of your Mitsubishi ASX. Start by pulling the bonnet release lever located near the door hinge…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos