|
Do it yourself
| |||
| ||||
How to Replace the Remote Battery for the Mitsubishi Mirage?
Model: Mitsubishi Mirage
LA, A10, A00
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
Replacing the remote battery for the Mitsubishi Mirage, as shown in this tutorial, is an extremely simple and quick operation. To do this, you will need a small Phillips screwdriver and a replacement CR1616 battery. First, unscrew the screw located on the back, near the emergency key, then separate the two halves and extract the internal module. Next, open this module by prying along the seam and proceed with replacing the battery, ensuring the replacement is positioned correctly. Finally, reassemble everything by following the reverse procedure.
Updated on 29 July 2026 by ScegliAuto
Related tutorials
Mitsubishi Mirage
(2012-2024 /
LA, A10, A00)
Replacing the battery in the remote for a Mitsubishi Mirage is an extremely simple and inexpensive task. You will need a small flathead screwdriver a…
Mitsubishi Mirage
(2012-2024 /
LA, A10, A00)
In this tutorial, you will see how to open the fuel door on a Mitsubishi Mirage, a very simple operation that follows the typical procedure for most …
Mitsubishi Mirage
(2012-2024 /
LA, A10, A00)
In this tutorial, you will see how to open the hood on a Mitsubishi Mirage, a very simple operation that follows the typical procedure for most vehic…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
How to Replace the Front Headlamp Bulb in a Kia Stonic?
Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.140
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |