Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Valves on the Moto Guzzi Le Mans 1000?

Model: Moto Guzzi Le Mans 1000
Part: Valve

Video tutorial

To adjust the valves on the Moto Guzzi Le Mans 1000, you need to loosen the screws that secure the cover on top of the engine block, allowing access to the underlying valves: you will then need to adjust their opening using a feeler gauge, following the value indicated in the owner's manual.

Once the valve adjustment is correctly completed, you can close the cover by securing it with the appropriate screws and then check that everything functions correctly.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to Adjust the Valves on the Moto Guzzi Le Mans 1000?
How to Adjust the Valves on the Moto Guzzi Le Mans 1000?
Le Mans 1000 To adjust the valves on the Moto Guzzi Le Mans 1000, loosen the bolts located on the side of the bike, just below the fuel tank. Once the bolts are l…
How to Replace the Starter Motor on a Moto Guzzi Le Mans 1000
Le Mans 1000 To replace the starter motor on a Moto Guzzi Le Mans 1000, loosen the bolts that secure it to its housing. The part is located on the left side of th…
How to remove the camshaft from a Moto Guzzi Le Mans 1000?
How to remove the camshaft from a Moto Guzzi Le Mans 1000?
Le Mans 1000 To remove the camshaft from a Moto Guzzi Le Mans 1000, first remove the distributor, as the camshaft will be at top dead centre. Loosen the bolts sec…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos