Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the clutch of the Moto Guzzi Eldorado?

Model: Moto Guzzi Eldorado
Part: Clutch

Video tutorial

In order to replace the clutch of the Moto Guzzi Eldorado, you need to loosen the screws that fix the engine block to its housing in the center of the frame, disconnecting all the cables and intake and exhaust pipes. In the area between the flywheel and the transmission, you will be able to locate the clutch, which can be detached from its pressure plate by unscrewing the fixing screws: once the old clutch has been removed from its seat, you can insert the new one, fixing it properly.

After installation, you will need to reassemble all the removed parts and check their operation.


Posted on 11 February 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Moto Guzzi Eldorado
How to Change the Engine Oil of the Moto Guzzi Eldorado
Eldorado Follow the steps below to perform the routine maintenance oil change on the Moto Guzzi Eldorado. First, place the motorcycle on its stand and remove …
How to Replace the Engine Oil Pressure Switch on the Moto Guzzi Eldorado
How to Replace the Engine Oil Pressure Switch on the Moto Guzzi Eldorado
Eldorado In this brief guide, we will see the instructions that will allow you to remove and replace the engine oil pressure switch on the Moto Guzzi Eldorado…
How to Adjust the Valves on a Moto Guzzi Eldorado 1400
How to Adjust the Valves on a Moto Guzzi Eldorado 1400
Eldorado To adjust the valves on a Moto Guzzi Eldorado 1400, you need to loosen the screws securing the cover located on the right side of the bike. Once this…

How to Replace the Front Headlight Bulbs in the Aprilia Tuono V4 1100?

In this tutorial, you will see how to replace the front headlight bulbs in the Aprilia Tuono V4 1100, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by positioning yourself near the headlight in question, then locate and open the circular cap at the back of it. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from its housing. Finally, insert the replacement bulb without touching the glass with bare hands and follow the reverse procedure to reassemble everything.

Watch the video!


by ScegliAuto

More videos