Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Moto Guzzi Griso
Part: Valve

In order to adjust the valves of the Moto Guzzi Griso, you need to loosen the screws that hold the valve cover in place: this can be found on the right side of the motorcycle and once removed will allow access to the valve seats below. To adjust the clearance, you will need to use a feeler gauge and follow the values indicated in the vehicle's user manual: once the adjustment has been made, you can close the valve cover again to ensure everything is functioning correctly.

Posted on 4 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Moto Guzzi Griso
How to Replace the Exhaust on a Moto Guzzi Griso
Griso This guide will show you how to remove and replace the exhaust on a Moto Guzzi Griso, following the instructions below. First, place the motorcycle o…
How to Replace the Alternator Belt on Moto Guzzi Griso 1200
How to Replace the Alternator Belt on Moto Guzzi Griso 1200
Griso This guide provides the main instructions on how to remove and replace the alternator belt on the Moto Guzzi Griso 1200. First, place the motorcycle …
How to Replace the Clutch on a Moto Guzzi Griso 1200
How to Replace the Clutch on a Moto Guzzi Griso 1200
Griso This guide explains the procedure to remove and replace the clutch discs on a Moto Guzzi Griso 1200. To replace the clutch, you need to remove the en…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos