Do it yourself
Frequently asked questions about cars and motorcycles
After positioning the bike securely, you can proceed to replace the gear oil. Start by unscrewing, using the appropriate spanners, the two bolts located at the bottom of the gearbox, one on the side and one underneath (as seen in the video images). After this operation, allow all the oil in the gearbox to drain into a container placed under the lower hole. Once the gearbox has been emptied, re-screw the lower bolt and proceed to pour in the new oil using a small funnel through the side hole. Re-screw the side bolt and you're done!

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Stelvio In this video tutorial, follow the main instructions on how to carry out the routine maintenance service for the oil change of the Moto Guzzi Stelvio…
Stelvio In this video, you will learn how to carry out the routine maintenance service for an oil change on a Moto Guzzi Stelvio in simple and quick steps. F…
Stelvio In this video, we will see how to replace the transmission oil on a Moto Guzzi Stelvio, a procedure that must be performed at every maintenance inter…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos