Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust on the Moto Guzzi Stelvio, you need to loosen the screws that secure the component to its housing: this will be located on the left side of the motorcycle and can be released from the appropriate fastening screws near the fender. Once the screws have been loosened, you can proceed to widen the clamp that is located between the exhaust and the exhaust manifold: once the old terminal has been freed, you can insert the new one. The latter must be secured with screws and connected to the manifolds, ensuring it functions properly.

Posted on 4 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on the Moto Guzzi Stelvio
How to Replace the Exhaust on the Moto Guzzi Stelvio
Stelvio You can replace the exhaust fitted on the Moto Guzzi Stelvio by loosening the screws that secure the exhaust terminal to its housing, located near th…
How do you replace the exhaust pipe of the Moto Guzzi Stelvio?
How do you replace the exhaust pipe of the Moto Guzzi Stelvio?
Stelvio In order to replace the exhaust pipe of the Moto Guzzi Stelvio, you need to loosen the screws that fix the exhaust terminal to the appropriate suppor…
How do you replace the motor oil of the Moto Guzzi Stelvio?
How do you replace the motor oil of the Moto Guzzi Stelvio?
Stelvio It will be possible to perform the procedure for replacing the motor oil of the Moto Guzzi Stelvio by loosening the drain plug of the oil pan located…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos