Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, we will see how to change the engine oil in the Moto Guzzi V7 Stone, a very simple and quick operation. First, ensure that the engine is cool enough, then place a container underneath, locate the drain bolt, and unscrew it using a 17mm socket. Allow all the oil in the system to drain out, open the filter cap with a 13mm wrench, and insert the replacement. At this point, reassemble everything and add the required amount of oil through the designated upper hole.

Posted on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

V7 Stone Follow these steps to replace the engine oil and oil filter on the Moto Guzzi V7 Stone as part of routine maintenance. First, place your bike on a st…
V7 Stone In this tutorial we can see how to replace the engine oil in the Moto Guzzi V7 Stone, an extremely simple and quick operation. First of all, we wait …
V7 Stone To replace the wing mirror on a Moto Guzzi V7 Stone, secure the nut that holds the lower part of the mirror support using an appropriately sized span…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos