Do it yourself
Frequently asked questions about cars and motorcycles
In this brief guide, you will find the instructions to remove and replace the exhaust terminals of a Moto Guzzi V7 Stone. First, place the bike on the stand and start unscrewing the upper bracket screw of the terminal and the lower screw of the clamp connected to the exhaust manifold; then extract the terminal, as shown in the video. Next, perform the same operation to remove the other exhaust terminal; then install the new terminals, fitting the dedicated brackets and securing them properly to the exhaust manifolds!

Posted on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

V7 Stone To replace the exhaust on the Moto Guzzi V7 Stone, loosen the bolt that secures the exhaust support at the rear. Once the support is detached from th…
V7 Stone Below we will see the instructions necessary to disassemble and replace the battery of the Moto Guzzi V7 Stone. First of all, we put the motorcycle o…
V7 Stone In this video, we will see the instructions to remove and replace the battery on a 2014 Moto Guzzi V7 Stone. First, remove the battery cover located …

How to Dismantle the Engine of the KTM EXC 300

To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is extracted, unscrew the bolts that secure the cylinder at its top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. You can now replace the necessary parts and subsequently reinstall the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos