Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This tutorial shows how to change the engine oil in the Moto Guzzi Stelvio, a very simple and quick operation. First, ensure the engine is cool enough, then remove the lower cover and place a container underneath the bike. Next, locate the drain hole bolt, unscrew it using an 8mm hex key, and let all the oil in the system drain out. Now, open the filter cap with an 8mm socket, insert the replacement, reassemble everything, and add the necessary amount of oil through the designated top hole.

Posted on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Moto Guzzi Stelvio
How to Change the Engine Oil and Oil Filter on a Moto Guzzi Stelvio
Stelvio Let's go through the steps to change the engine oil and oil filter while performing the regular maintenance service on a Moto Guzzi Stelvio 1200. Fir…
How do you replace the motor oil of the Moto Guzzi Stelvio?
How do you replace the motor oil of the Moto Guzzi Stelvio?
Stelvio To replace the motor oil of the Moto Guzzi Stelvio, you need to loosen the drain plug located at the bottom of the oil pan: once this is removed, you…
How to Perform Maintenance Service (Oil Change) on a Moto Guzzi Stelvio
How to Perform Maintenance Service (Oil Change) on a Moto Guzzi Stelvio
Stelvio In this video, you will learn how to carry out the routine maintenance service for an oil change on a Moto Guzzi Stelvio in simple and quick steps. F…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos