Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Oil on a Moto Guzzi Stelvio

Model: Moto Guzzi Stelvio
Part: Engine oil

Video tutorial

In this video, we will see how to replace the engine oil on a Moto Guzzi Stelvio. First, unscrew the bolts with an Allen key located at the bottom of the metal shield: then unscrew the oil drain plug, allowing the oil to drain into a container (wait about twenty minutes before replacing the plug to ensure all the old oil has drained).

Now screw the bolt back in and replace the oil filter cartridge, as shown in the video. Finally, pour the oil into the designated fill hole, removing the dipstick and unscrewing the bolt!


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How do you replace the motor oil of the Moto Guzzi Stelvio?
How do you replace the motor oil of the Moto Guzzi Stelvio?
Stelvio To replace the motor oil of the Moto Guzzi Stelvio, you need to loosen the drain plug located at the bottom of the oil pan: once this is removed, you…
How to Perform Maintenance Service (Oil Change) on a Moto Guzzi Stelvio
How to Perform Maintenance Service (Oil Change) on a Moto Guzzi Stelvio
Stelvio In this video, you will learn how to carry out the routine maintenance service for an oil change on a Moto Guzzi Stelvio in simple and quick steps. F…
Replacing the Transmission Oil of the Moto Guzzi Stelvio
Replacing the Transmission Oil of the Moto Guzzi Stelvio
Stelvio In this video tutorial, follow the main instructions on how to carry out the routine maintenance service for the oil change of the Moto Guzzi Stelvio…

How to Replace the Headlamp Bulb on a Harley Davidson Street Bob

Today, we will guide you on how to dismantle and replace the headlamp bulb on a Harley Davidson Street Bob. First, place your motorcycle on a stand and start by removing the metal frame of the headlamp by unscrewing the fixing screw. Then, remove the optical unit and disconnect the electrical connector of the bulb, as shown in the video. At this point, remove and replace the headlamp bulb with the correct type that has the same fitting (in this case, H4). Finally, reassemble the optical unit and secure the metal frame!

Watch the video!


by ScegliAuto

More videos