Changing the Final Drive Oil on Moto Guzzi V85TT

Model: Moto Guzzi V85tt
Part: Wheel

This video is currently unavailable

Start the engine for a few minutes to thin the oil, making it easier to drain. As shown in the video, remove the lower drain screw and the upper fill screw to open the holes (remove both to avoid a vacuum, further aiding the flow of the lubricant).

Once you have collected the used oil in a container, measure the amount of oil drained to know how much to replace (it should be 140 cc). Clean both screws/caps thoroughly before refitting them. Close the drain hole and add new lubricant through the upper hole.

Updated on 30 March 2026 by ScegliAuto

Related tutorials

How to Change the Gear Oil on a Moto Guzzi V85TT?

V85tt To change the gear oil on a Moto Guzzi V85TT, you need to loosen the oil drain plug located at the bottom of the bike. By unscrewing this plug, you c…

How to Change the Engine Oil on a Moto Guzzi V85TT?

V85tt To change the engine oil on your Moto Guzzi V85TT, first ensure the engine is cold. Position the bike on a flat, stable surface. Remove the oil cap o…

How to Change the Transmission Oil on a Moto Guzzi V85TT

V85tt The steps outlined in this guide will show you how to drain and refill the transmission oil on the Moto Guzzi V85TT. First, place the motorcycle on i…

How to Set the Clock on the Sym Jet14 125?

To adjust the clock on the Sym Jet14 125, turn on the instrument panel by inserting the ignition key into the corresponding slot. Once the panel is on, press and hold the M button located underneath until one of the numbers on the clock starts flashing. At this point, repeatedly press the S button, also located beneath the panel, to change that number. After making the change, press the M button to move on to the next numbers, finishing by turning off the panel.

Watch the video!

by ScegliAuto

Changing the Final Drive Oil on Moto Guzzi V85TT

Related tutorials

How to Set the Clock on the Sym Jet14 125?

More videos