Do it yourself
Frequently asked questions about cars and motorcycles

Fixing Shock Absorber Creak on Moto Guzzi V85 TT

Model: Moto Guzzi V85tt
Part: Shocks

This video is currently unavailable

Before removing the shock absorber, lift the wheel with a jack, placing a rubber pad to avoid damage. Unscrew the lower bolt with a 15 mm spanner and pull the shock absorber out of its seat.

Lower the jack slightly and unscrew the upper bolt from one side only. Now the affected shock absorber will come out easily.

As shown in the video, remove rust and debris using a flat-head screwdriver. Grease the working area of the shock absorber and clean off any excess.

Refit the part in reverse order: place it back in position, first screw in the upper bolt and then the lower one.


Updated on 5 April 2026 by ScegliAuto


Related tutorials

V85tt In this tutorial, we can see how to replace the engine oil in the Moto Guzzi V85 TT, an extremely simple and quick operation. First of all, let's mak…
V85tt This short video shows you how to remove the rear wheel on a Moto Guzzi V85 TT and similar models, allowing you to clean or replace it. After placing…
V85tt In this tutorial we can see how to replace the motor oil in the Moto Guzzi V85 TT, a very simple and quick operation. First of all, make sure that th…

How to replace the engine oil and oil filter on a Moto Guzzi V7 Stone

Let’s discover the steps to perform routine maintenance by replacing the engine oil and oil filter on the Moto Guzzi V7 Stone. First, place the motorcycle on its stand and begin to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; clean or replace the metal oil filter as shown in the video. At this point, unscrew the oil filler cap and top up the oil; check the level from the side window!

Watch the video!


by ScegliAuto

More videos