Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Access the Battery of the Moto Guzzi V7

Model: Moto Guzzi V7 Classic
Part: Battery

Video tutorial

To access the battery of the Moto Guzzi V7 (for charging or replacing it), first ensure your motorcycle is stable and secure, as should be done for any maintenance operation on a bike, to work safely. Now, using the appropriate Allen key, remove the two screws that secure the fairing element where the name of the motorcycle (V7 Stone) is written.

Once this is done, remove the element itself. This will give you access to the battery.

Using the appropriate tool, unscrew the bolt that secures the negative terminal and the one that holds the battery in place. The battery can now be extracted!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of a Moto Guzzi V7
How to Change the Engine Oil of a Moto Guzzi V7
V7 Classic Hello! Today you will change the oil on your Moto Guzzi V7. First, position the bike on the centre stand and warm up the engine for a few minutes. Ne…
How do you replace the exhaust on a Moto Guzzi V7?
How do you replace the exhaust on a Moto Guzzi V7?
V7 Classic It will be possible to replace the exhaust muffler installed on the Moto Guzzi V7 by loosening the screws that secure the exhaust tip to its housing:…
How to Replace the Exhaust on a Moto Guzzi V7 850?
How to Replace the Exhaust on a Moto Guzzi V7 850?
V7 Classic To replace the exhaust on a Moto Guzzi V7 850, loosen the screws that secure it to its housing, located near the rear wheel on the right side. Once t…

How to Change the Engine Oil of a Triumph Speed 400?

To change the engine oil of a Triumph Speed 400, start by positioning the bike on a flat surface and ensure the engine is warm but not too hot. Locate the oil filler cap on the engine and unscrew it. Place a collection container under the oil drain plug on the oil sump and unscrew the plug to allow the used oil to drain out. Once the draining is complete, refit the drain plug. Remove and replace the oil filter using an oil filter wrench. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the filler cap opening until it reaches the recommended level, and you will have completed the change.

Watch the video!


by ScegliAuto

More videos