Do it yourself
Frequently asked questions about cars and motorcycles

How to perform a service (engine oil change) on Moto Guzzi V9 Roamer

Model: Moto Guzzi V9 Roamer
Part: Engine oil

Video tutorial

In this video, you will see how to perform routine maintenance by replacing the engine oil and oil filter on a Moto Guzzi V9 Roamer. First, position the motorcycle on the stand and start by removing the oil drain bolt located under the engine, using a socket spanner; allow it to drain into a container for about ten minutes.

At this point, remove the oil filter found inside the sump, replacing it with a new, correct type; finally, pour the new oil into the engine casing, filling it to the correct level!


Updated on 15 April 2026 by ScegliAuto


Related tutorials

V9 Roamer To change the gearbox oil on a Moto Guzzi V9 Roamer, access the underside of the bike. The drain plug for the gearbox oil reservoir is located immedi…
V9 Roamer To change the gearbox oil of the Moto Guzzi V9 Roamer, access the underside of the bike: the drain plug for the gearbox oil tank is located just behi…
V9 Roamer To adjust the valves on the Moto Guzzi V9 Roamer, remove the screws securing the valve cover located on the right side of the bike, near the fuel tan…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos