Do it yourself
Frequently asked questions about cars and motorcycles
Before starting, take a short ride to warm up the oil, then place your Moto Guzzi V85TT on the centre stand. Begin by unscrewing the filler nut, then position a container beneath the lower drain nut. After placing the container, unscrew the lower nut to let the engine oil drain out. Once the oil has drained, refit the lower nut, then add new gearbox oil. After refitting the filler nut, the replacement will be complete.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

V85tt The steps outlined in this guide will show us how to drain and refill the transmission oil of the Moto Guzzi V85TT. First, we put the motorcycle on t…
V85tt To change the gear oil on a Moto Guzzi V85TT, you need to loosen the oil drain plug located at the bottom of the bike. By unscrewing this plug, you c…
V85tt It will be possible to replace the gearbox oil of the Moto Guzzi V85TT by loosening the drain plug of the transmission crankcase, located at the bott…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos