Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you change the gearbox oil on the Moto Guzzi V85TT?

Model: Moto Guzzi V85tt
Part: Transmission fluid

This video is currently unavailable

To change the transmission oil of the Moto Guzzi V85TT, you need to loosen the drain plug located at the bottom of the transmission case. Once the plug is removed, you can let all the used oil flow into a properly positioned container.

After the oil has drained out, you should close the plug so that you can now add the new oil. The new oil should be added through the vent on the right side of the bike, in the lower area. After refilling, you should check that everything is functioning properly.


Posted on 11 December 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Moto Guzzi V85TT?
How to Change the Engine Oil on a Moto Guzzi V85TT?
V85tt To change the engine oil on your Moto Guzzi V85TT, first ensure the engine is cold. Position the bike on a flat, stable surface. Remove the oil cap o…
How to Change the Engine Oil on a Moto Guzzi V85TT?
How to Change the Engine Oil on a Moto Guzzi V85TT?
V85tt You can perform the engine oil change on the Moto Guzzi V85TT by loosening the drain plug located at the central lower part of the bike: once this pl…
How do you replace the exhaust pipe of the Moto Guzzi V85TT?
How do you replace the exhaust pipe of the Moto Guzzi V85TT?
V85tt To replace the exhaust pipe of the Moto Guzzi V85TT, you need to loosen the screws that fix the exhaust terminal to its housing: once these support f…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos