Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the Moto Guzzi V7 III

Model: Moto Guzzi V7 Iii
Part: Brake pads

Video tutorial

In this guide, you will learn how to remove and replace the rear brake pads on the Moto Guzzi V7 III in simple and quick steps. First, place your motorcycle on the centre stand and start unscrewing the two fixing screws of the brake caliper support, removing it from the disc; then unscrew the two locking pins of the pads to remove them from the caliper, as shown in the video.

Now, apply pressure on the caliper piston to retract it, cleaning it from dirt; all that’s left is to install the new brake pads!


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to replace the rear brake pads on the Moto Guzzi V7 III?
How to replace the rear brake pads on the Moto Guzzi V7 III?
V7 Iii To replace the rear brake pads on the Moto Guzzi V7 III, loosen the bolts securing the brake caliper to the corresponding wheel disc. Once these bolt…
How to Replace the Rear Brake Pads on a Moto Guzzi V7
How to Replace the Rear Brake Pads on a Moto Guzzi V7
V7 Iii Follow these instructions to remove and replace the rear brake pads on your Moto Guzzi V7. First, place your bike on the centre stand and start unscr…
Replacing the Brake and Clutch Levers on a Moto Guzzi V7 III
Replacing the Brake and Clutch Levers on a Moto Guzzi V7 III
V7 Iii This video shows how to remove and replace the brake and clutch levers on a Moto Guzzi V7 III. First, remove the front brake lever by unscrewing the …

How to Change the Engine Oil on a Kymco Xtown 300?

To change the engine oil on a Kymco Xtown 300, loosen the drain plug of the oil reservoir, located at the central lower part of the bike: once loosened, you can collect the engine oil in a suitably positioned container. After all the oil has drained, you can also remove the oil filter from underneath and replace it with a new spare part; then, top up by adding the new oil through the filler located on the right side of the bike, near the exhaust.

Watch the video!


by ScegliAuto

More videos