Do it yourself
Frequently asked questions about cars and motorcycles

Model: Moto Guzzi Stelvio
Part: Shocks

To replace the rear shock absorber on a Moto Guzzi Stelvio, loosen the bolts securing it within its housing at the rear of the bike. The part will be secured by two bolts, one at the top and one at the bottom: once these screws are loosened, you can slide the part out from the lower side of the bike. This will allow you to insert the new part into its housing so that it can then be secured with the appropriate screws at the bottom and top.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Stelvio To remove the rear shock absorber from the Moto Guzzi Stelvio, loosen the bolts that secure the shock absorber: it is located near the rear wheel. To…
Stelvio To replace the rear shock absorber on the Moto Guzzi Stelvio, you need to loosen the bolts that secure it in its housing at the rear of the bike. The…
Stelvio You can replace the exhaust fitted on the Moto Guzzi Stelvio by loosening the screws that secure the exhaust terminal to its housing, located near th…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos