Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on the Moto Guzzi Stelvio, you need to loosen the screws that secure the engine guard plate located at the bottom of the bike, so it can be removed from its housing. Once the plate is removed, you will have access to the oil drain plug, which must be unscrewed to collect the used oil in a container; next to the drain plug, you will find the oil filter, which should be removed from its housing and replaced with a new spare part. Finally, you can top up the oil through the breather located on the right side of the bike.

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Moto Guzzi Stelvio?
How to Change the Engine Oil in the Moto Guzzi Stelvio?
Stelvio This tutorial shows how to change the engine oil in the Moto Guzzi Stelvio, a very simple and quick operation. First, ensure the engine is cool enoug…
How to Perform Maintenance Service (Oil Change) on a Moto Guzzi Stelvio
How to Perform Maintenance Service (Oil Change) on a Moto Guzzi Stelvio
Stelvio In this video, you will learn how to carry out the routine maintenance service for an oil change on a Moto Guzzi Stelvio in simple and quick steps. F…
How to Change the Engine Oil and Oil Filter on a Moto Guzzi Stelvio
How to Change the Engine Oil and Oil Filter on a Moto Guzzi Stelvio
Stelvio Let's go through the steps to change the engine oil and oil filter while performing the regular maintenance service on a Moto Guzzi Stelvio 1200. Fir…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos