Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's guide will show you the steps to install hand guards on the Moto Guzzi V85TT, following the instructions below. First, place your motorcycle on the centre stand and begin installing the hand guard brackets on the handlebars and the side, as well as on the crossbar, securing them properly. Then, install the plastic covers of the hand guards on them, as illustrated in the video. At this point, adjust the hand guards to ensure they do not interfere with the operation of the front brake lever or the clutch!

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Front Mudguard on a Moto Guzzi V85TT
How to Install the Front Mudguard on a Moto Guzzi V85TT
V85tt In this short and simple guide, you will see the steps to install the front mudguard on the Moto Guzzi V85TT, following the instructions below. First…
How to Change the Engine Oil on a Moto Guzzi V85TT?
How to Change the Engine Oil on a Moto Guzzi V85TT?
V85tt To change the engine oil on your Moto Guzzi V85TT, first ensure the engine is cold. Position the bike on a flat, stable surface. Remove the oil cap o…
How to Stop the Creaking of the Suspension on the Moto Guzzi V85TT
How to Stop the Creaking of the Suspension on the Moto Guzzi V85TT
V85tt In this tutorial video, you will learn how to stop the creaking of the suspension on the Moto Guzzi V85TT, following the instructions below. First, p…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos