Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Moto Guzzi V7?

Model: Moto Guzzi V7 Stone
Part: Engine oil

Video tutorial

To change the engine oil on a Moto Guzzi V7, start by lifting the bike with a stand to ensure safe and easy access to the engine. Locate the oil drain plug, which is situated beneath the engine; place a container underneath to collect the used oil. Unscrew the plug with an appropriate spanner and allow the oil to flow completely into the container.

Once the oil is fully drained, refit the drain plug and tighten it securely. Next, open the oil filler cap on the engine and pour in the new engine oil through the opening.

Use a funnel to avoid spills and ensure you use the oil recommended in the owner's manual. After adding the correct amount of oil, refit the filler cap. Start the engine and let it run for a few minutes to allow the oil to circulate, then check for any leaks and the oil level.

If necessary, add more oil to reach the correct level. This maintenance is crucial for ensuring the longevity and proper functioning of the engine.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Replace Engine Oil and Oil Filter on Moto Guzzi V7 Stone
Replace Engine Oil and Oil Filter on Moto Guzzi V7 Stone
V7 Stone Follow these steps to replace the engine oil and oil filter on the Moto Guzzi V7 Stone as part of routine maintenance. First, place your bike on a st…
How to replace the engine oil in the Moto Guzzi V7 Stone?
How to replace the engine oil in the Moto Guzzi V7 Stone?
V7 Stone In this tutorial we can see how to replace the engine oil in the Moto Guzzi V7 Stone, an extremely simple and quick operation. First of all, we wait …
How to Change the Engine Oil in the Moto Guzzi V7 Stone?
How to Change the Engine Oil in the Moto Guzzi V7 Stone?
V7 Stone In this tutorial, we will see how to change the engine oil in the Moto Guzzi V7 Stone, a very simple and quick operation. First, ensure that the engi…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos