Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Filter and Oil on a Moto Morini Scrambler

Model: Moto Morini Scrambler
Part: Oil filter

Video tutorial

How to replace the filter and oil on a Moto Morini Scrambler? Follow this guide to perform maintenance. Position the motorcycle on its original stand, and using a socket spanner, unscrew the bolt from the oil sump as shown in the video (drain the fluid into a basin).

Unscrew the cartridge oil filter using a strap wrench; remove the worn oil filter and fit a new one into the thread after cleaning the underside of the engine. Finally, top up the new oil in the engine and secure with the cap. Test the operation of the motorcycle.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter of the Ducati Scrambler
How to Change the Engine Oil and Oil Filter of the Ducati Scrambler
Scrambler The engine oil and filter on the motorcycle should be replaced at regular intervals to ensure proper engine function; here’s how to perform the routi…
Engine Oil and Oil Filter Replacement for the Ducati Scrambler
Engine Oil and Oil Filter Replacement for the Ducati Scrambler
Scrambler Learn the procedure for performing the routine maintenance service by replacing the engine oil and oil filter on the Ducati Scrambler. First, place y…
How to Change the Engine Oil on the Triumph Scrambler?
How to Change the Engine Oil on the Triumph Scrambler?
Scrambler To change the engine oil on the Triumph Scrambler, loosen the oil drain plug located at the bottom centre of the vehicle. Once unscrewed, collect the…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos