Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Moto Morini
    3. : 350 V Twin

How to Replace the Belt on Moto Morini 350 V-twin

Model: Moto Morini 350 V Twin
Part:

Video tutorial

In this video tutorial, we will see how to disassemble and replace the belt on a Moto Morini 350 V-twin in simple and quick steps. First, position your bike on the centre stand and start by removing the screws from the right side cover to take it off; then remove the flywheel by unscrewing the central nut, as shown in the video.

Now unscrew the screws of the stator, remove it, and take off the washer on the crankshaft; then remove the old belt and replace it with the new one. For reassembly, simply follow the reverse procedure!


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Replace the Belt on the Moto Morini 350
How to Replace the Belt on the Moto Morini 350
Morini 350 In this video, we will discover the instructions that will allow you to remove and replace the drive belt on the Moto Morini 350. First, remove the s…
How to Replace the Belt on the Moto Morini Kanguro 350
How to Replace the Belt on the Moto Morini Kanguro 350
Kanguro 350 To replace the belt on the Moto Morini Kanguro 350, loosen the bolts securing the cover located on the right side of the bike, at the bottom. Once th…
How to Replace the Timing Belt on a Moto Morini 400
How to Replace the Timing Belt on a Moto Morini 400
Morini 400 In this video tutorial, you will learn how to remove and replace the timing belt on a Moto Morini 400, following the instructions below. First, place…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos