Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Moto Morini
    3. : Kanguro 350
To replace the belt on the Moto Morini Kanguro 350, loosen the bolts securing the cover located on the right side of the bike, at the bottom. Once these bolts are loosened, you can remove the cover to access the components underneath. Here you will find the stator, which needs to be released from its seat by unscrewing the screws that hold it in place: removing the stator will allow access to the belt, which must be removed from its pulleys so that it can be replaced with a new one. After the replacement, reassemble all the previously removed components.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Belt on the Moto Morini 350
How to Replace the Belt on the Moto Morini 350
Morini 350 In this video, we will discover the instructions that will allow you to remove and replace the drive belt on the Moto Morini 350. First, remove the s…
How to Replace the Belt on Moto Morini 350 V-twin
How to Replace the Belt on Moto Morini 350 V-twin
350 V Twin In this video tutorial, we will see how to disassemble and replace the belt on a Moto Morini 350 V-twin in simple and quick steps. First, position yo…
How to Replace the Timing Belt on a Moto Morini 400
How to Replace the Timing Belt on a Moto Morini 400
Morini 400 In this video tutorial, you will learn how to remove and replace the timing belt on a Moto Morini 400, following the instructions below. First, place…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos