Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the motor oil of a MV Augusta F3?

Model: Mvagusta F3 800
Part: Engine oil

Video tutorial

To change the motor oil of a MV Augusta F3, start by making sure the engine is cold or warm. Place the motorcycle on a flat and elevated surface safely using a center stand or side stand.

Find the oil drain plug at the bottom of the engine and position a suitable container underneath it. Unscrew the drain plug to allow the old oil to completely drain into the container. Once all the oil has drained, remove the oil filler cap located on the top of the engine and fill the engine with the new oil recommended by the manufacturer.

Make sure to use a clean funnel to avoid spills. Check the oil level using the dipstick and add more oil if needed to reach the correct level.

Finally, securely tighten the drain plug and oil filler cap, then start the engine for a few minutes to allow the oil to circulate. Check the oil level again and add if necessary.

Make sure to properly dispose of the used oil at an authorized collection center.


Posted on 18 January 2025 by ScegliAuto


Related tutorials

How to change the motor oil of a MV Augusta F3 800?
How to change the motor oil of a MV Augusta F3 800?
F3 800 To change the motor oil of an MV Augusta F3 800, start by placing the motorcycle on a flat and secure surface. Start the engine and let it warm up fo…
How to Replace the Oil on an MV Augusta F3 800
How to Replace the Oil on an MV Augusta F3 800
F3 800 To replace the oil on your motorcycle, start by unscrewing the screws of the lower fairing, keeping the screws safe. Ensure the engine is cold before…
How to Change the Engine Oil and Oil Filter on an MV Agusta F3 800
How to Change the Engine Oil and Oil Filter on an MV Agusta F3 800
F3 800 In this guide, discover how to change the engine oil and oil filter on an MV Agusta F3 800 by following these simple and quick steps. First, place th…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos