Do it yourself
Frequently asked questions about cars and motorcycles
To perform the brake bleeding on the MV Agusta F4 1078RR, you need to loosen the drain plug that allows the brake fluid to escape from the respective system: this plug will be located at the front and rear calipers. Once the fluid has completely drained, you can insert the new brake oil into the system: to do this, you will need to remove the covers located at the base of the calipers. After refilling, you should pump the brakes a few times to allow the fluid to circulate.

Posted on 11 December 2025 by ScegliAuto

Video tutorial

Related tutorials

F4 1078rr The procedure for replacing the motor oil on the MV Agusta F4 1078RR is carried out by loosening the screws that secure the bottom panel of the motor…
F4 1078rr To replace the exhaust on the MV Agusta F4 1078RR, loosen the bolts securing the exhaust at the rear of the vehicle, where it attaches to the rear mu…
F4 1078rr To replace the exhaust on the MV Agusta F4 1078RR, loosen the screws that secure the right fairing of the bike. Once these screws are loosened, you c…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos