Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the spark plug on the MV Agusta Brutale 800, insert the key into the designated lock to remove the seat. This will provide access to the screws underneath, which must be loosened along with those on the side fairings. This will allow you to remove the tank after disconnecting the connector at the bottom. Doing this will give you access to the spark plug, which can be extracted with a socket wrench after disconnecting the coil. After removal, you can replace it with a new spare part and reinstall all previously removed components.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a MV Agusta Brutale 800
How to Replace the Exhaust on a MV Agusta Brutale 800
Brutale 800 To replace the exhaust on the MV Agusta Brutale 800, you need to remove the plastic cover located on the right side of the bike, just before the exha…
How to Replace the Exhaust on the MV Agusta Brutale 800?
How to Replace the Exhaust on the MV Agusta Brutale 800?
Brutale 800 To replace the exhaust on the MV Agusta Brutale 800, remove the plastic cover located on the right side of the bike, just before the exhaust. Under t…
How do you replace the exhaust pipe of the MV Agusta Brutale 800?
Brutale 800 The exhaust pipe installed on the MV Agusta Brutale 800 can be completely replaced by removing the plastic cover located on the right side of the veh…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos