|
Do it yourself
| |||
| ||||
|
Model: Mvagusta F3 800
To replace the coolant in the MV Agusta F3 800, loosen all the screws securing the side fairings on both the right and left sides. Once the fairings are removed, you can also unscrew the bolts securing the fuel tank, which must be removed after disconnecting the hoses and connectors. Then, open the coolant drain cap located on the right side of the bike and collect all the fluid in a container. Finally, top up by pouring the fluid into the radiator at the front of the bike.
Updated on 29 May 2026 by ScegliAuto
Video tutorial
Related tutorials
F3 800
This guide provides the main instructions on how to remove and replace the water pump on the MV Agusta F3 800 motorcycle. To access the water pump, y…
F3 800
To replace the exhaust on the MV Agusta F3 800, remove the plastic cover located on the right side of the bike, just before the exhaust. Under this c…
F3 800
To replace the exhaust valve on a MV Agusta F3 800, loosen the screws that secure the valve: it will be accessible from the right side of the bike, l…
|
How to Replace the Battery of the Kymco Agility 125?
To replace the battery of the Kymco Agility 125, lift the seat to access the compartment underneath. At the rear of the under-seat compartment, you will find the battery under the corresponding panel. By unscrewing the screws that secure the panel, you can access the battery underneath, which must be freed from the corresponding securing screws and the appropriate power cables. Once the device is free, insert the new one, connecting and securing it properly, and cover everything with the panel. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.011
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |