Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Np300
    4. : 1997-2022 (D22)

Nissan Np300 Years 1997-2022 (D22)

Nissan Np300 (1997-2022 / D22)
How to reset the service reminder on the Nissan NP300
In this video we can see how to reset the service light on the Nissan NP300: we get into the car and close the doors, then we activate the instrument panel, …read all…
Posted on 29 February 2024 by ScegliAuto
Nissan Np300 (1997-2022 / D22)
Where is the fuse for the cigarette lighter socket of the Nissan NP300 located?
If the cigarette lighter stops working suddenly or if there is a malfunction, the cause is most likely a blown fuse. Replacing a blown fuse is very simple, all …read all…
Posted on 19 October 2023 by ScegliAuto
Nissan Np300 (1997-2022 / D22)
How do you reset the AdBlue light on the Nissan NP300?
When the AdBlue light appears on the instrument panel of the Nissan NP300, it means that the additional liquid inside the corresponding tank is almost …read all…
Posted on 11 October 2023 by ScegliAuto
Nissan Np300 (1997-2022 / D22)
How to install the armrest on the Nissan NP 200.
In this video, we see how to install a universal armrest on a Nissan NP200. The accessory recommended by the YouTuber can be found on AliExpress with the code …read all…
Posted on 3 August 2023 by ScegliAuto
Nissan Np300 (1997-2022 / D22)
Where are the fuses located on the Nissan NP300/Frontier/d40?
In this video, we see where the fuse boxes are located in the Nissan NP300 (but it also applies to the Frontier and D40). The interior box is located behind …read all…
Posted on 7 June 2023 by ScegliAuto
Nissan Np300 (1997-2022 / D22)
Where are the fuses located in the Nissan NP300 pickup?
In this video we can see where the fuses are located in the Nissan NP300 pick-up, useful in case we need to check the status of the fuse of a malfunctioning …read all…
Posted on 18 December 2022 by ScegliAuto
Bodywork (1) Checks and maintenance (2) Instrument cluster (1) Fuse box (4)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos