Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the AdBlue warning light on the Nissan NP300?

Model: Nissan Np300 D22 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: AdBlue warning light

See other generations:
Video tutorial

When the AdBlue warning light appears on the dashboard of the Nissan NP300, it means that the additional fluid in the respective tank is almost depleted: therefore, you can turn off the light by refilling it. This will be done by opening the flap located on the side of the vehicle, on the right side: this way, you can insert the necessary amount of additional fluid into the tank.

After refilling, turn on the dashboard to check that the light has been reset.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

How do you reset the Service light on the Nissan NP300?
How do you reset the Service light on the Nissan NP300?
Nissan Np300 (1997-2022 / D22) In order to reset the Service light of the Nissan NP300, you need to insert the ignition key into the corresponding slot, so that you can turn on the…
How to reset the service light on the Nissan NP300 pick-up?
How to reset the service light on the Nissan NP300 pick-up?
Nissan Np300 (2014-2024 / D23) In this tutorial we can see how to reset the service in the Nissan NP300 pick-up, an extremely simple and quick operation, to be carried out only onc…
Where is the fuse for the cigarette lighter on the Nissan NP300?
Where is the fuse for the cigarette lighter on the Nissan NP300?
Nissan Np300 (1997-2022 / D22) If the cigarette lighter stops working suddenly or if there is a fault, the cause is likely a blown fuse. Replacing a blown fuse is straightforward; …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos