Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Nissan NP300?

Model: Nissan Np300 D22 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
Part: Service warning light

See other generations:
Video tutorial

In order to reset the Service light of the Nissan NP300, you need to insert the ignition key into the corresponding slot, so that you can turn on the instrument panel: once it is turned on, you can press and hold the TRIP button located in the center of the instrument panel.

By continuing to hold it down, you will notice that the light will turn off after a few seconds and at that point you can release the button; at the end of the procedure, you can turn off the instrument panel to complete the operation.


Posted on 17 June 2025 by ScegliAuto


Related tutorials

How to restore the service of the Nissan NP300
How to restore the service of the Nissan NP300
Nissan Np300 (2014-2024 / D23) In today's article, we will show you how to reset the maintenance light on the Nissan NP300. This operation will take less than 1 minute to complete …
In the Nissan Navara Np300, how do you reset the service light?
In the Nissan Navara Np300, how do you reset the service light?
Nissan Np300 (2014-2024 / D23) The visible warning in the video guide uploaded here is subject to a maintenance program, like any internal combustion engine vehicle, so, consulting…
How to Reset the Service Light on a Nissan NP300
How to Reset the Service Light on a Nissan NP300
Nissan Np300 (1997-2022 / D22) In this video, see how to reset the service light on a Nissan NP300: enter the vehicle and close the doors, then activate the instrument panel withou…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos