Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

In the Nissan Navara Np300, how do you reset the service light?

Model: Nissan Np300 D23 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

The visible warning in the video guide uploaded here is subject to a maintenance program, like any internal combustion engine vehicle, so, consulting the user and maintenance manual, we will carry out what is required, maintenance of brakes, distribution, oil, etc. Once this is done, we will proceed independently with the cancellation of the maintenance reminder in the instrument panel: turn on the instrument panel, press and hold the button located at the bottom of the odometer for a few seconds, release it, and shortly after the warning light will be canceled after a few flashes.

Operation completed.


Posted on 29 September 2025 by ScegliAuto


Related tutorials

Location and Diagram of the Fuse Boxes for the Nissan NP300 (Navara)
Location and Diagram of the Fuse Boxes for the Nissan NP300 (Navara)
Nissan Np300 (1997-2022 / D22) The Nissan NP300 corresponds to the Nissan Navara D40 in many markets and has two main fuse boxes. The first is located in the cabin, under the dashb…
How to restore the service of the Nissan NP300
How to restore the service of the Nissan NP300
Nissan Np300 (2014-2024 / D23) In today's article, we will show you how to reset the maintenance light on the Nissan NP300. This operation will take less than 1 minute to complete …
How do you reset the Service light on the Nissan NP300?
How do you reset the Service light on the Nissan NP300?
Nissan Np300 (1997-2022 / D22) In order to reset the Service light of the Nissan NP300, you need to insert the ignition key into the corresponding slot, so that you can turn on the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos